Canon Printer TS3522

The Ultimate Guide to Canon Printer TS3522: Setup, Error Codes, and Troubleshooting

Welcome to the ultimate guide for your Canon Printer TS3522! Whether you’re setting up your new printer or troubleshooting pesky error codes, this comprehensive guide has got you covered. Proper setup and understanding error codes are essential for seamless printing. If you encounter any issues along the way, don’t worry. Canon printer support is available, and you can also reach out to us at +185-8326-5662 or visit Fixolive for assistance.

Canon Printer TS3522 Setup:

Unboxing and Initial Setup: Upon unboxing your Canon Printer TS3522, ensure all components are present. Follow the setup instructions provided in the manual or quick start guide. It typically involves removing packaging materials, installing ink cartridges, and loading paper.

Connecting Canon TS3522 Printer to Wi-Fi: To enjoy wireless printing convenience, connect your Canon TS3522 printer to Wi-Fi. Refer to the step-by-step guide provided in the manual. In case of any difficulties, check your Wi-Fi settings and ensure compatibility with the printer. For troubleshooting tips, visit

Connecting Canon TS3522 Printer to Computer: For seamless printing from your computer, install the necessary drivers and software. Canon provides compatible drivers for various operating systems on their official website. Follow the installation wizard, and if you encounter any issues, refer to troubleshooting resources online or contact Canon printer support.

Connecting Canon TS3522 Printer to iPhone and Phone: Wireless printing from your mobile devices, including iPhone and Android phones, is convenient with the Canon TS3522. Download the Canon PRINT app from the App Store or Google Play Store, and follow the setup instructions. Should you encounter any challenges during setup, visit for assistance.

Must Read : Unleash the Power of Print: Enhance Your Experience with Epson

How to Reset Canon TS3522 Printer?

If you need to reset your Canon Printer TS3522 to factory settings, follow these steps:

  1. Turn off the printer.
  2. Press and hold the Wi-Fi button and the Cancel button simultaneously.
  3. While holding the buttons, press the Power button.
  4. Keep holding the Wi-Fi and Cancel buttons until the Power light flashes twice, then release the buttons.
  5. The printer will reset to factory settings.

Canon Printer TS3522 Error Codes:

Understanding Common Error Codes: While using your Canon Printer TS3522, you may encounter error codes indicating various issues. Refer to the manual or online resources to understand the meaning of each error code. Common error codes include paper jams, ink cartridge issues, and connectivity problems.

Troubleshooting Error Codes: When faced with error codes, follow the troubleshooting steps provided in the manual. Simple solutions like clearing paper jams or restarting the printer often resolve minor issues. For complex problems, refer to online resources or contact Canon printer support for assistance.

Most Common Error Codes:

  1. E02 – Paper Feed Issue: This error indicates a problem with the paper feed system, commonly caused by a lack of paper or a paper jam. It prompts users to load paper or clear any paper jams.
  2. E03 – Paper Jam: Error E03 indicates a paper jam within the printer. Users are advised to open the cover and remove any jammed paper to resolve this issue.
  3. E04 – Improper Ink Cartridge Installation: This error signifies that the ink cartridge is not installed correctly. Users should reinstall the cartridge properly to clear the error.
  4. E05 – Ink Cartridge Recognition Failure: Error E05 suggests that the printer cannot recognize the installed ink cartridge. Users are advised to check the cartridge installation and compatibility to resolve this issue.
  5. E08 – Ink Absorber Full: This error indicates that the ink absorber inside the printer is almost full. Users can press the OK button to continue printing, but service may be required to replace the absorber.
  6. E09 – Protective Material on Ink Cartridge: Error E09 indicates that protective material or tape may still be attached to the ink cartridge holder. Users should remove the protective material to clear this error.
  7. E11 – Print Settings Error: This error occurs when the printer cannot perform printing with the current print settings. Users are prompted to change the print settings before proceeding with printing.
  8. E12 – Data Printing Error: Error E12 suggests that specified data cannot be printed. Users are advised to check for messages on their computer and ensure that ink cartridges are installed correctly before retrying printing.
  9. E13 – Ink Running Out: This error indicates that the ink may have run out. Users are recommended to replace the ink cartridge, although they can continue printing by pressing and holding the Stop button.
  10. E14 – Ink Cartridge Recognition Failure: Similar to E05, this error signifies a failure in recognizing the ink cartridge. Users should replace the ink cartridge to clear this error.


In conclusion, setting up and troubleshooting your Canon Printer TS3522 doesn’t have to be daunting. With this comprehensive guide, you have everything you need to ensure smooth printing experiences. Remember, if you need further assistance, don’t hesitate to reach out to Canon printer support or contact us at +1-858-326-5662 or visit for expert help. Happy printing!

Leave a Reply

Your email address will not be published. Required fields are marked *